Rain Bird ESP-TM2 Fixed 4 Station Controller
Rain Bird’s ESP Series of controllers has been expanded to offer a contractor grade irrigation controller for residential and light commercial applications. The ESP-TM2 Controller is available in four models suitable for indoor or outdoor applications (4-Station, 6-Station, 8-Station and 12-Station).
Applications
The ESP-TM2 provides flexible scheduling features to accommodate a wide variety of landscape applications. Plus powerful advanced irrigation features that help to meet any type of regional watering restrictions.
Easy to Use
The ESP-TM2 Controller is designed to be an easy to use, program-based controller with the familiar ESP user interface, a large LCD screen and universal icons on both the controller overlay and the LCD.
Easy to Install
The ESP-TM2 Controller requires only two screws for easy wall mounting. For professional installation, it has a guide for ½“ or ¾” conduit to run field wires into the unit. A factory installed 6’ pigtail offers a plug and play solution out of the box.
Controller Hardware
- Plastic wall-mount cabinet with door
- 4, 6, 8 or 12 station models
- Mounting screws with anchor shields
- Factory installed pigtail Controller Features
- NEW large back-lit LCD display for improved visibility in low-light and direct sunlight conditions
- Familiar, easy to navigate user interface
- Rain sensor input with bypass capability
- Master valve/pump start circuit
- Nonvolatile (100 year) storage memory
- Electronic diagnostic circuit breaker
- Remote accessory port for Rain Bird approved accessory devices
Scheduling Features
- Program based scheduling with 3 individual programs and 4 independent start times per program for 12 total start times
- Watering schedule options: Custom Days of the week, ODD or EVEN calendar days, or Cyclic (every 1 – 30 days)
Advanced Features
- Manual Watering option for all stations, a single station or an individual program
- Seasonal Adjust applied to all programs or an individual program
- Delay Watering up to 14 days (applies only to stations set to obey Rain sensor)
- Permanent Days Off (for Odd, Even or Cyclic programming)
- Sensor bypass for all programs or for individual stations
- Adjustable delay between stations
- Contractor Default™ Program Save and Restore saved program(s)
- Master Valve on/off by station
- Automatic short detect with station specific alarm messages
Operating Specifications
- Station timing: 1 minute to 6 hours
- Seasonal Adjust: 5% to 200%
- Max operating temperature: 149°F (65°C)
Electrical Specifications
- Input required: 120VAC (±10%) @ 60Hz
- Output: 1A at 24VAC
- Master Valve/Pump Start Relay
- External battery back-up not required. Nonvolatile memory permanently saves the current programming and a 10 year life lithium battery maintains the controllers time and date during power outages.
Dimensions
- Width: 7.92 in. (20,1 cm)
- Height: 7.86 in. (20,0 cm)
- Depth: 3.51 in. (9,0 cm)
